Record a podcast with a DJI Mic and your phone
A small wireless lavalier clipped to your shirt makes a phone recording sound far better, because it stays the same distance from your mouth however you move. This guide shows how to connect a DJI Mic to an iPhone, an iPad or an Android phone, what to set, and how to get from recording to a published episode.
Which DJI Mic?
| Model | Good for | Notes |
|---|---|---|
| DJI Mic 2 | The all-round pick | Receiver takes a Lightning or USB-C adapter. Transmitter about 28 g, about 6 hours of battery. |
| DJI Mic Mini | Lightest, solo | Transmitter about 10 g, about 10 hours; listed with Bluetooth direct recording to a phone. |
| DJI Mic 3 / Mic Mini 2 | Newer models | Mic 3 transmitter about 16 g; Mini 2 (April 2026) can pair with Mic Mini, Mic 2 and Mic 3 transmitters. |
Retailer listings differ, so confirm the details on DJI's page for the exact model you buy.
Connect it: two ways
1. Receiver plugged into the phone (best, works everywhere)
- Pair the transmitter with the receiver (they come paired in the box).
- Plug the receiver into the phone. USB-C phones (current iPhones and iPads, most Android phones) use the USB-C connector; Lightning iPhones need the Lightning adapter made for your receiver. Adapter names are confusing, so check that the one you buy lists your receiver model.
- The phone sees a USB microphone. In your recorder, check that the input shown is the DJI receiver, not "iPhone Microphone".
2. Bluetooth directly to the phone (convenient, lower quality)
Some transmitters, such as the Mic Mini, can connect to the phone without a receiver. Phones treat Bluetooth microphones as call audio, which usually means lower quality than a wired receiver. Use it for convenience, not for your best episode.
Settings that matter
- Level. Aim for speech peaking around −12 dB, never touching 0. Clipping cannot be repaired afterwards. Quiet is safer than loud.
- Backup track and low-cut. If your model offers a lower-level safety track or a low-cut filter, turn them on for your first recordings.
- Placement. Clip it on the sternum, 15–20 cm below the chin, away from clothing rustle and necklaces. A foam cover helps against plosives.
- Check the input before you talk. The most common failed episode is an hour recorded on the phone's own microphone because the receiver wasn't selected.
Recording on each device
- iPhone and iPad: NeoPodcast shows the active microphone while you record, and you can pick the input from the recorder. Do a ten-second test, play it back with headphones, then record for real.
- Android: use your phone's recorder or any app that lists the USB input, then bring the audio file into a podcast tool. There is no NeoPodcast app for Android yet; a web version for creating and publishing your first episodes is planned for 1.1.
From recording to published
- Record in a quiet room. Soft furnishings absorb echo better than any microphone can hide it.
- Trim the start and the end. Natural pacing sounds better than removing every pause.
- Give it a title and a short description, and publish to a podcast feed.
- Submit the feed once to Apple Podcasts, Spotify, YouTube and others; later episodes appear automatically.
On iPhone and iPad NeoPodcast does the middle of that for you: it records, transcribes on your device, drafts the title and notes where your device allows it, and gives you the feed and platform-by-platform steps. Learn more.
Sources
- Heliguy: DJI Mic 3 vs Mic Mini vs Mic 2
- Clifton Cameras: guide to the DJI Mic range
- Park Cameras: DJI Mic Mini 2 review and comparison
Published 8 November 2026 by NeoPodcast. More guides · NeoPodcast for Android, iPhone and iPad
